Skip to content

Ultrasonic Contact Impedance probe UCI T-U3 By NOVATEST

Brinell , etc.) for hardness control of steel and other metals ; – Possibility of hardness control of items that are inaccessible for stationary hardness … Detection of breast cancer and regular monitoring of the response to neoadjuvant chemotherapy are important issues for large numbers of women. To address these needs, we developed a new instrument for examination of stiffness of the breast using haptic sensor technology.

Best Practices for Materialographic Sample Preparation

The single hard copy print may only be distributed to others for their internal use within your organization; it may not be copied. The individual Document downloaded may not otherwise be sold or resold, rented, leased, lent or sub-licensed. Any situation where traditional hardness measuring techniques are not possible or useful. A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.

The instrument consists of a 64-element tactile sensor array designed to visualize haptic information within the breast. It was demonstrated in both basic and clinical studies that the hardness of breast cancer lesions larger than 10mm located at depths less than 20mm could be detected using this novel haptic probe. We expect that the proposed instrument will be useful for the detection and follow-up of treatment and to predict the response to neoadjuvant chemotherapy. This test method covers the determination of comparative hardness values by applying the Ultrasonic Contact Impedance Method . Micro Vickers/Knoop hardness benchtop testers are cost-effective options in Vickers hardness applications. Testing is per-formed on extremely thin/small workpieces and is often used for checking the hardness of layers, platings and coatings on small parts in a laboratory environment.

portable hardness testing equipment

SU-300H can not only work with the manual probes, but also work with the motorized probes, which is able to meet the different application in light of different condition of surface roughness. ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices integrated in insulating glass units . This test helps to understand the relative serviceability of electrochromic glazings applied on ECD. The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum.

The UCI method uses the same pyramid-shaped diamond as a conventional Vickers hardness tester. Unlike Vickers testing, no optical evaluation of the indentation is required, enabling fast and portable measurements. The test load is applied by a spring and typically ranges from 1 to 5 kg of force (HV1 – HV5). As the diamond is forced into the material, the frequency of the rod oscillation changes in response to the contact area between the diamond and the material under test. The instrument detects the shift in frequency, converts it to a hardness value which is immediately displayed on the screen. PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces.

Two notable advantages over sEMG-based sensing are that the proposed sensing method is far less sensitive to skin contact conditions and that it can measure muscle contractions through one’s clothes. Being capable of body force estimations noninvasively, the proposed sensing method is attractive in the field of exoskeleton robots or human-augmentation systems. Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 10N. ultrasonic contact impedance hardness testing can be used in conjunction with the test rig for the hardness testing of chromium-plated or copper-coated printer rolls. Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 3N. Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 5N.

The 10 N sensor measures a roughness of less than 3.2 µm and the one with 98 N measures a roughness of less than 15 µm. Hardness testing is absolutely critical in many industries and phases of manufacturing. Detecting defects during this process can save thousands of dollars and a lot of headaches later due to product or structural failure. Instead, you want to use a non-destructive testing method, like Ultra Sonic Hardness testing.

Software-driven digital optical systems offer advantages over manual microscopes that are supplied with several hardness testing machines. Connected to a PC, laptop or tablet, the operator can push a single button to take automatic and instant measurements. All graphics can be saved along with test results in either Word or Excel formats. Use the scale of tensile strength for determining the tensile strength of carbon steel products pearlitic by automatically converting from Brinell hardness scale.

Published inUncategorized

Be First to Comment

Leave a Reply

Your email address will not be published. Required fields are marked *